Honeywell ABP2LNNG010BG2A3XX Board Mount Pressure Sensors ABP2 SERIES,High Accuracy

• Customization: Available
• Type: Piezoresistive Pressure Sensor
• Output Signal Type: Analog Type
• Model NO.: ABP2LNNG010BG2A3XX
• Material: Plastic
• Measuring Medium: Liquid
• Certification: ISO
• Condition: Original New
• Product Series: ABP2 Amplified Basic
• Package: Leadless SMT
• Pressure Type: Gage
• Operating Pressure: 10 bar
• Accuracy: ±0.25 %FSS BFSL
• Supply voltage: 3.3 Vdc
• Operating Temperature range: -40°C to 110°C
• Storage Temperature range: -40°C to 125°C
• Shock: 75 g, 6 ms duration
• Manufacturer: Honeywell
• Trademark: Honeywell
• Origin: China

Product Description

The Honeywell ABP2 Series are piezoresistive siliconpressure sensors offering a digital oranalog output for reading pressure overthe specified full scale pressure span andtemperature range. They are calibratedand temperature compensated forsensor offset, sensitivity,temperatureeffects and accuracy errors (whichinclude non-linearity,repeatabilityand hysteresis)using an on-boardApplication Specific Integrated Circuit(ASlC). Calibrated outputvalues forpressure and temperature are updated atapproximately 200 Hz. All products aredesigned and manufactured accordingto1S09001 standards.The liquid mediaoption includes an additionalgel coatingto protect the electronics under port P1, which enables use with non-corrosiveliquids (e.g.waterand saline)and inapplications where condensation canoccur. The Honeywell ABP2 Series is available intube packaging. Pocket tape and reelpackaging is available upon request.

 

POTENTIAL APPLICATIONS
Medical:
Ventilators/portableventilators,CPAP, blood analysis, bloodpressure monitoring,breast pumps,drug dosing,hospital beds,massagemachines, oxygen concentrators,patient monitoring,sleep apneaequipment,urine analyzers and woundtherapy
Industrial:
HVAC transmitters, lifesciences,material handling, pneumaticcontroland regulation, process gasmonitoring and valve positioning/positioners
Commercial:
Air beds, coffee makers,washing machines,level measurement.dish washers,vacuum cleaners, handdryers and rice cookersTransportation: Air brakes,CNGmonitoring, fork lifts and fuel levelmeasurement
 

FEATURES

• Total Error Band (see Figure 1):  As low as ±1.5 %FSS

• Liquid media option:  Compatible with a variety of liquid media

• Long-term stability:  As low as ±0.2 %FSS

• Accuracy:  ±0.25 %FSS BFSL

• Wide pressure range: 6 mbar to 12 bar

                                     600 Pa to 1.2 MPa

                                     2 inH2O to 175 psi

• High burst pressures

• Wide operating temperature range of -40°C to 110°C [-40°F to 230°F]

• Calibrated over wide temperature range of -40°C to 110°C [-40°F to 230°F]

• 24-bit digital I2C or SPI-compatible output

• Ratiometric analog output

• IoT (Internet of Things) ready interface

• Ultra-low power consumption:  As low as 0.01 mW typ. average power

                                                   1 Hz measurement frequency

• Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 2

• REACH and RoHS compliant

• Temperature output available

• NSF-169, LFGB and BPA compliant materials

 

VALUE TO CUSTOMERS

• Simplifies design-in:  Small size saves room on the PC board (PCB), simplifying design in smaller and lower power devices

• Meets IPC/JEDEC J-STD-020E Moisture Sensitivity Level 2 requirements:  
-Allows avoidance of thermal and mechanical damage duringsolder reflow attachment and/or repair that lesser rated sensors may incur

- Allows unlimited storage life, when stored inside sealed moisture barrier bag

- Allows for lean manufacturing due to stability and usability shortly after reflow

• Cost-effective:

- Small size helps engineers reduce design and manufacturing costs while maintaining enhanced performance and reliability of the systems they design

• Accurate:

- Total Error Band (TEB) and wide pressure range enable engineers to optimize system performance by improving resolution and system accuracy

• Flexible:

- Supply voltage range, variety of pressure units, types and ranges, output options, and wide operating temperature range simplify use in the application

• Versatile:

- Wet-media compatibility, low power, and temperature output options make the sensor a versatile choice for Internet of Things applications
 

DIFFERENTIATION

• Application:

- Specific design ensures suitability for a wide array of customer requirements

• Digital output:

- Allows the sensor to be directly plugged into the customer's circuitry without requiring major design changes

• Total Error Band (see Figure 1):

- Provides a more comprehensive measurement of performance over the compensated temperature range, which minimizes testing and calibrating every sensor, thereby potentially reducing manufacturing cost; improves sensor accuracy and offers ease of sensor interchangeability due to minimal part-to-part variation

- Improves sensor accuracy

- Offers ease of sensor interchangeability due to minimal part-to-part variation

 

ABP2LNNG010BG2A3XX Tech Specifications

Description	Product Attribute
Manufacturer	Honeywell
Product Category	Board Mount Pressure Sensors
Pressure Type	Gage
Operating Pressure	10 bar
Accuracy	0.25 %
Output Type	Digital
Mounting Style	Lead Less SMD/SMT
Operating Supply Voltage	3.3 V
Port Type	Dual Axial Barbed Ports, Same Side
Minimum Operating Temperature	- 40 ºC
Maximum Operating Temperature	+ 110 ºC
Series	ABP2
Supply Voltage - Max	3.6 V
Supply Voltage - Min	1.8 V

 

Characteristic	Analog			Digital			Unit
	Minimum	Typical	Maximum	Minimum	Typical	Maximum
Supply voltage (Vsupply)1    3.3 Vdc    5.0 Vdc	3.0 4.75	3.3 5.0	3.6 5.25	1.8 -	3.3 -	3.6 -	Vdc
Current consumption: I2C sleep/standby mode SPI sleep/standby mode	- -	- -	- -	3.0 13.0	33.8 43.8	211.0 221.0	nA
Power consumption	-	9.5	-	-	3.1	-	mW
Operating temperature range2	-40 [-40]	-	110 [230]	-40 [-40]	-	110 [230]	°C [°F]
Compensated temperature range3	-40 [-40]	-	110 [230]	-40 [-40]	-	110 [230]	°C [°F]
Startup time4	-	-	5	-	-	2.5	ms
Clipping limit for analog version: Upper Lower	- 2.5	- -	97.5 -	- -	- -	- -	Vsupply
Update/data rate	-	1000	-	161	204	-	Samples/s
SPI/I2C voltage level: Low High	- -	- -	- -	- 80	- -	20 -	%Vsupply
Pull up on SDA, SCL	-	-	-	1	-	-	kOhm
Total Error Band5: 0°C to 50°C    -20°C to 85°C    -40°C to 110°C	- - -	- - -	±1.5 ±3.0 ±4.5	- - -	- - -	±1.5 ±3.0 ±4.5	%FSS6 %FSS6 %FSS6
Accuracy7	-	-	±0.25	-	-	±0.25	%FSS BFSL
Resolution	0.03 -	- -	- -	14	- -	- -	%FSS bits
Temperature output error8	-	-	-	-	±5	-	°C

1 Sensors are not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

2 Operating temperature range: The temperature range over which the sensor will produce an output proportional to pressure.

3 Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the

specified performance limits (see Total Error Band).

4Startup Time: For analog versions: 5 ms to data ready. For digital versions: 2.5 ms for power up to receive the first measurement command.

Refer to Section 3.0, Tables 21, 22 and 25 for further details on communication timing.

5 Total Error Band: The maximum deviation from the ideal transfer function over the entire compensated temperature and pressure range.

Includes all errors due to offset, full scale span, pressure non-linearity, pressure hysteresis, repeatability, thermal effect on offset, thermal effect

on span and thermal hysteresis.

6 Full Scale Span (FSS): The algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of

the pressure range (see Figure 2).

7 Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at

25°C [77°F]. Includes all errors due to pressure non-linearity, pressure hysteresis and non-repeatability.

8 Temperature Output Error: The error in Temperature Output reading relative to a thermal reference standard over a temperature range of-40°C to 125°C.

 

 

 

BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.

Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10, 000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.

It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.

The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.

BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: Magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.

History of BNSENS Company:

BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.

1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.

2002: The company expanded its product line and launched temperature sensors

2005: Started producing high-precision pressure sensors for the test and measurement market

2006: Became an official authorized agent of Honeywell

2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved

2010: Became a supplier of Emerson

2011: We started selling SICK sensors

2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC

2015: Cooperated with Siemens in Vietnam

2017: The factory moved to Nanjing High-tech Zone

2019: Became a national high-tech enterprise in China

2023: We started selling products from Infineon and Rohm

BNSENS, The Future Starts Here.