Honeywell Enraf VITO MTT Combi Probe for Enraf Tank Temperature Measurement

• Customization: Available
• Condition: Original New
• Application: An electronic converter used with the VITO probes
• Data communication: HART® communication to Tank Gauging ATG *2
• Ambient temp. range: -40 °C to +60 °C (-40 °F to +140 °
• Mounting: Direct on VITO probes using standard 1/2''BSPentry
• Ingress protection: IP66 / IP67 according to EN 60529 (NEMA 4X)
• Transport Package: Carton
• Trademark: Honeywell

Product Description

Product Description

Honeywell's Enraf® temperature gauging systems offer reliability, high measurement accuracy, minimal maintenance cost and easy installation for all types of liquid bulk terminals and storage facilities.

What is It?
Honeywell's Enraf® Tank Temperature Measurement portfolio ranges from single spot temperature probes to the advanced VITO Multiple Thermosensor Thermometers (MTT) for accurate temperature measurement. If required a water level probe can be integrated measuring the water level accurately at the bottom of the tank.

The VITO interface guarantees faultless communication with level gauges based on radar or servo technology.
Interfacing the tank gauge with the temperature measurement and even water level measurement reduces costs for wiring and installation.

How Does It Work?
Honeywell offers several types of temperature measurement instruments:
Spot Temperature Measurement is performed by probes directly connected to a level gauge and mounted at any desired location in the tank
Average Temperature Measurement is made possible by the VITO MRT which consists of multiple resistor elements, each with a different length. Depending on the liquid level measured by the level gauge, the longest element which is completely submerged in the liquid is selected to represent the average temperature of the stored product Multiple Temperature Measurement is performed by the VITO LT which measures average product temperature and average gas temperature with a nine-element probe, while the VITO MTT goes a step further with a 16-element probe.

What Problems Does it Solve?
Honeywell's temperature measurement portfolio exceeds the requirements of all in-tank measurement standards. The top end temperature gauging systems – VITO LT and VITO MTT - are suitable for custody transfer purposes in conformity with weights and measures regulations. In addition, the VITO MTT is fit for LNG storage.

Advanced sensor technology.

The VITO MTT temperature & water probe together with Honeywell Enraf automatic tank gauging equipment is the answer for accurate inventory management on tanks containing product and free water. VITO MTT uses industry leading Multiple Thermosensor Thermometer sensing technology for reliable measurement of average product temperature, water bottom level, vapor temperature and temperature profiles. It is also fully compliant with legal metrology requirements and API MPMS Chapter 7, Section 3. A robust design, meanwhile, ensures minimal maintenance and easy installation.

Specification

Temperature Sensing: 766 VITO Temperature & Water Probe
Principle
Measuring principle	Cold junction compensated thermocouples (type T) to measure the temperature differentials with respect to a 4 wire 1/5 DIN Class A Pt100 reference resistor, physically embedded to cold junction.
Number of elements	16 temperature elements
Measuring Specifications
766 Probe temp. range	-55 °C to +135 °C (-67 °F to +275 °F)
Storage temperature	-55 °C to +135 °C (-67 °F to +275 °F)
Probe accuracy	±0.1 °C (±0.18 °F) ^*1
Measuring resolution	0.01 °C (0.01 °F)
Measuring length	Refer to Identification Code (also see dimensional drawing). For longer probes consult factory.

Water Sensing: 766 VITO Temperature & Water Probe
Principle
Principle	PTFE sheathed capacitive probe
Measuring Specifications
Measuring range	Depending on identification code, 50 cm (20"), 100 cm (39") and 200 cm (79"
Accuracy	±2 mm (0.078") *1, water is measured only between 0 °C to +100 °C (+32 °F to +212 °F) process temperature range.
Measuring resolution	0.1 mm (0.004")
Minimum water level	25 mm (0.98")

General: 766 VITO Temperature & Water Probe
Mechanical
Sheathing	Stainless steel AISI 316L (mat. no. 1.4404) corrugated probe
Adjusting pipe	Stainless steel AISI 316L (mat. no. 1.4404), adjustable length: ±230 mm (±9"), ISO 228/1-G1/2B (1/2'' BSP)
Lining water probe	PFA (fluoropolymer)
Outer diameter of probe	40 mm (1.57")
Mounting flange	Optional, 1/2 BSP threaded mounting hole required
Anchor weight	Optional, max. 23 kg (50 lb)
Environmental Safety
Operating pressure	5 bar / 500 kPa (72 psi) Hydrostatic pressure
Safety	– II 1G Ex ia IIB T4 Ga; acc. to ATEX KEMA 01ATEX1212  – Ex ia IIB T4 Ga; acc. to IECEx KEM 05.0014  – Ex ia IIB Ta; acc. to Kosha certificate; 13-AV4BO-0487  – Class I, Division 1, Groups C & D; acc. to FM I. D. 3015746  – Class I, Division 1, Groups C & D; acc. to CSA certificate 1635480  – Ex ia IIB T4 Ga; acc. to INMETRO TÜV 13.0975 X  For other approvals and updates please consult factory
Electrical
Flying lead length	Color coded PTFE insulated stranded wires. Length: 35 cm (14") and 120 cm (47")

762 VITO Interface
Specifications
Application	An electronic converter used in combination with the VITO probes
Data communication	HART® communication to Tank Gauging ATG^*2
Ambient temp. range	-40 °C to +60 °C (-40 °F to +140 °F)
Storage temperature	-40 °C to +60 °C (-40 °F to +140 °F)
Cable entry	Cable entry options; M20 x 1.5, 3/4" NPT via reducer and PG16 via reducer
Mounting	Direct on VITO probes using standard 1/2'' BSP entry
Housing	Chromatized, Polyurethane coated Aluminum, GD-AISi10Mg
Ingress protection	IP66 / IP67 according to EN 60529 (NEMA 4X)
Safety	– II 1/2G Ex ia IIB T4 Ga/Gb; acc. to ATEX KEMA 01ATEX1212  – Ex ia IIB T4 Ga/Gb; acc. to IECEx KEM 05.0014  – Ex ia IIB Ta; acc. to Kosha certificate; 13-AV4BO-0487  – Class I, Division 1, Groups C & D; acc. to FM I. D. 3015746  – Class I, Division 1, Groups C & D; acc. to CSA certificate 1635480  – Ex ia IIB T4 Ga/Gb; acc. to INMETRO TÜV 13.0975 X  For other approvals and updates please consult factory
Note(s):  *1 Under reference conditions.  *2 HART® is a registered trademark of the HART Communications Foundation.

Ordering Guide

PART NUMBER	DESCRIPTION	CATEGORY	TYPE
305	SPOT THERMOMETER	Base Part	Tank Thermometer
361	MPT Probe	Spare Part	Temperature Probe
365	MPT Probe+Water	Spare Part	Water Probe
762	VITO INTERFACE	Spare Part	Interface
764	VITO TEMPERATURE PROBE	Spare Part	Temperature Probe
765	VITO WATER PROBE	Spare Part	Water Probe
766	VITO TEMP&WATER PROBE	Spare Part	Temperature and Water Probe
767	VITO LT TEMPERATURE PROBE	Spare Part	Temperature Probe
768	VITO LT TEMP&WATER PROBE	Spare Part	Temperature and Water Probe
864	Multiple Temperature Thermometer(NYLON)	Base Part	Tank Thermometer
U0762560	VITO IP Adapter Kit	Spare Part	Adapter Kit

Company Profile

BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.

Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10,000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.

It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.

The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.

BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.

History of BNSENS Company:

BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.

1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.

2002: The company expanded its product line and launched temperature sensors

2005: Started producing high-precision pressure sensors for the test and measurement market

2006: Became an official authorized agent of Honeywell

2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved

2010: Became a supplier of Emerson

2011: We started selling SICK sensors

2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC

2015: Cooperated with Siemens in Vietnam

2017: The factory moved to Nanjing High-tech Zone

2019: Became a national high-tech enterprise in China

2023: We started selling products from Infineon and Rohm

2025: We started cooperating with Fluke

BNSENS,The Future Starts Here.