Honeywell R8001M4150 SLATE™ Low Torque Actuator

• Customization: Available
• Certification: CCC, RoHS, ISO, CE
• PN: R8001M4150
• Model NO.: R8001M4150
• Manufacturer: Honeywell
• Condition: Original New
• Operating Temperature Range: -28 to +70 °C
• Relative Humidity: 0 to 99% non condensing (for commercial models)
• Weight: 1.4 Kg
• Commercial Control Deadband: ±0.2 degrees
• Industrial Control Deadband: ±0.1 degrees
• Working Voltage: 24VAC
• Input / Output: 0(2)-10VDC , 0(4)-20mA
• Transport Package: Carton
• Trademark: Honeywell

Product Description

APPLICATION

SLATE brings configurable safety and programmable logic together into one single platform. The SLATE program can easily be customized for almost any application-offering virtually limitless development opportunities with far less complexity.
The SLATE Low Torque Actuator series includes commercial- and industrial-grade 1/4-turn actuators available in 50 and 150 in/lb models with highly repeatable position accuracy designed specifically to integrate with the SLATE system. This series is well suited for the precise control of air and gas flow and can operate in a wide range of temperatures and environmental conditions.
 

SLATE™ Low Torque Actuator can be easily mounted to the following valves using the mounting kits noted below.

• Maxon CV Valve Series (1/2"-2") mounting kit #50123928-001

• Honeywell V51E Valve Series (1-1/2"-2") mounting kit #50124386-001 and mounting kit #32003396-001

• Honeywell V51E Valve Series (2-1/2"-4") mounting kit #50124386-001 and mounting kit #32003396-002

• Honeywell V5197A Valve Series (3/4"-3") mounting kit #50124386-001

  

FEATURES AND BENEFITS

• Offered in two different configuration options:

- NEMA 1 rated, operating in a temperature range of -18 to 158 °F (-28 to 70 °C) with 450 positions over a 90° span

- NEMA 4 rated, operating in a temperature range of -40 to 158 °F (-40 to 70 °C) with 900 positions over a 90° span

• Field-reversible clockwise and counterclockwise rotation operation.

• Internal temperature, valve status, health diagnostics, and error codes reporting.

• Robust, heavy-duty construction, continuous duty cycle-rated.

• Closed loop position control via Modbus RS-485 communications as an input to the SLATE Fuel Air Ratio Module, part R8001C6001.

• Dual 1/2-in knockout conduit connections.

• 1/2-in keyed output shaft with a 1/8-in square key.

• Die-cast aluminum base with high-impact resistant, reinforced plastic cover.

• Meets UL353 Safety for Limit Controls.

• Meets UL1998 when used with R8001C6001SLATE Fuel Air Ratio Module.

 

SPECIFICATIONS

Supply Voltage (Peak Current): DC model: 24VDC +10/-20%

Power:   50 in/lb: 10 Watts maximum

              150 in/lb: 25 Watts maximum

Rotation: Max span: 90° usable

Resolution: Commercial: 450 positions (0.2° resolution)

                     Industrial: 900 positions (0.1° resolution)

Control Deadband:  Commercial: ±0.2 degrees

                                   Industrial ±0.1 degrees

Dimensions in in (mm): 6-11/16 x 5-29/64 x 5- 29/64 (170 x 138 x 138); See Fig. 1

Weight: 3 Lbs. (1.4 Kg)

Operating Temperature: -28 to +70 °C (-18 to +158 °F) for commercial models;
                                          -40 to +70 °C (-40 to +158 °F) for industrial models

Storage Temperature: -40 to +80 °C (-40°F to +176°F)

Relative Humidity: 0 to 99% non condensing (for commercial models)

Vibration: Honeywell V2 test specification; 3 axes tested as follows:

                                   2-Hour Performance/Resonant Detection Sweep:

Vibration sinusoidal: 5 Hz - 30 Hz;

Amplitude: 0.012mil pk/pk75 mm

Vibration sinusoidal: 30 Hz - 300 Hz at 0.6G

Endurance: 1.1G for 2 hours at resonant frequencies

EMC: EN61000-6-1/2/3 (See Safety and Agency

          Approval Requirements), FCC Part 15, Level A

          EN55022, Level A

Enclosure: NEMA1 (commercial models)

                    NEMA 4 (industrial models)

Model 

Model Number		Description
Commercial
R8001M1050		50 in/lb Actuator NEMA 1 Enclosure
R8001M1150		150 in/lb Actuator NEMA 1 Enclosure
Industrial
R8001M4050		50 in/lb Actuator NEMA 4 Enclosure
R8001M4150		150 in/lb Actuator NEMA 4 Enclosure

Table 1. Model Specifications.

Actuator Options/Specs	Commercial Model				Industrial Model
	50 in-lb R8001M1050		150 in-lb R8001M1150		50 in-lb R8001M4050		150 in-lb R8001M4150
Communication	RS-485 non- isolated		RS-485 non- isolated		RS-485 Isolated		RS-485 Isolated
Fault Annunciation	Generic Alarm		Generic Alarm		Yes		Yes
Enhanced Data Logging	None		None		Yes		Yes
Resolution	.2 Degree		.2 Degree		.1 Degree		.1 Degree
Repeatability	.2 Degree		.2 Degree		.1 Degree		.1 Degree
Duty Cycle (Act Availability)	100%		100%		100%		100%
Opening Span	90 Degrees		90 Degrees		90 Degrees		90 Degrees
90 Degree Travel Time	30 sec		30 sec		15 sec max		15 sec max
Minimum Operating Temperature	-28 °C (-18 °F)		-28 °C (-18 °F)		-40 °C (-40 °F)		-40 °C (-40 °F)
Maximum Operating Temperature	70 °C (158 °F)		70 °C (158 °F)		70 °C (158 °F)		70 °C (158 °F)
Temp Sensor	Yes; Alarm Only		Yes; Alarm Only		Yes; Alarm and Real Time Data		Yes; Alarm and Real Time Data
Output	1/2-in Keyed Output Shaft		1/2-in Keyed Output Shaft		1/2-in Keyed Output Shaft		1/2-in Keyed Output Shaft
Keyed Connection	1/8-in Square Key		1/8-in Square Key		1/8-in Square Key		1/8-in Square Key
Conduit Connections	1/2-in Conduit Knockouts (2) (Shipped Closed)		1/2-in Conduit Knockouts (2) (Shipped Closed)		1/2-in Conduit Knockouts (2) (Shipped Closed)		1/2-in Conduit Knockouts (2) (Shipped Closed)

Table 2. Wiring Terminal Identification.

Type	Terminal	Description	Wiring
PE (Protective Earth)	Chassis ground screw	Chassis connection for mains power and shield/drain wires	Follow local codes for safety earth installation. See Electrical installation section for shield drain installation instructions.
DC power terminals	24V+	24VDC positive terminal	Shielded twisted pair cable is recommended. A replaceable 2A fuse is provided on all actuators. Use a slow blow fuse if additional external fusing is desired. Required gauges are: Up to 80 ft: 24 AWG Up to 120 ft: 22 AWG Up to 500 ft: 16 AWG Up to 800 ft: 14 AWG Up to 1200 ft: 12 AWG
	24V-	24VDC negative terminal
Low voltage communication (Modbus over RS-485) Industrial models only: R8001M4050, R8001M4150	RS485 In+	Isolated RS-485: positive	Shielded twisted pair cable with a separate common wire is recommended. See Electrical installation section for length limitations. Use 12-24 AWG wire. NOTE:   Shield should be tied to chas-              sis at Actuator side; do not              connect at SLATE (control-              ler) side.
	RS485 In-	Isolated RS-485: negative
	RS485COM	Isolated RS-485: common NOTE:   Must be connected for              reliable performance.
Low voltage communication (Modbus over RS-485) Commercial models only: R8001M1050, R8001M1150	RS485 In+	Non-isolated RS-485: positive
	RS485 In-	Non-isolated RS-485: negative
	RS485COM	Non-isolated RS-485: common See note1

1 Do not wire the non-isolated common terminal to the Slate system; leave it unconnected. Instead, wire the 24V- of the actuator supply to Pin 2 of the Slate Sub-Base. If all actuators share the same supply, only one connection is needed.

 

 

 

 

 

BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.

Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10, 000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.

It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.

The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.

BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: Magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.

History of BNSENS Company:

BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.

1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.

2002: The company expanded its product line and launched temperature sensors

2005: Started producing high-precision pressure sensors for the test and measurement market

2006: Became an official authorized agent of Honeywell

2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved

2010: Became a supplier of Emerson

2011: We started selling SICK sensors

2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC

2015: Cooperated with Siemens in Vietnam

2017: The factory moved to Nanjing High-tech Zone

2019: Became a national high-tech enterprise in China

2023: We started selling products from Infineon and Rohm

BNSENS, The Future Starts Here.