Fluke 376 FC True-RMS Clamp Meter with iFlex 376FC

• Customization: Available
• Brand: Fluke
• Certification: CE, ISO, RoHS
• Model NO.: Fluke 376 FC
• Product Type: Clamp Meter
• Condition: Original New
• Range: 999.9 A
• Resolution: 0.1 A
• Operating Temperature: -10 °C to +50 °C
• Storage Temperature: -40 °C to +60 °C
• Size: 249 x 85 x 45 mm
• Weight: 395 g
• Jaw Opening: 34 mm
• Flexible Current Probe Diameter: 7.5 mm
• Transport Package: Carton
• Trademark: Fluke
• Origin: China

Product Description

Product Description

The Fluke 376 FC True-rms Clamp Meter with iFlex is the most advanced troubleshooting tool for industrial and commercial electricians. The 376 is part of the Fluke Connect family of wireless test tools that enable you to log, trend and monitor measurements while remaining safely away from the arc flash zone through Bluetooth connectivity.

Find the cause of difficult problems

The 376 FC clamp meter uses an integrated low-pass filter for accurate measurements of non-linear signals, such as adjustable speed drives, electronic ballasts and other non-linear loads. The clamp also uses proprietary inrush measurement technology to filter out noise and capture motor starting current exactly as the circuit protection sees it.

Measure:

• Voltage to 1000 V AC or DC
• Resistance to 60 kΩ with continuity detection
• Min, max, average, and inrush recording to capture variations automatically
• 500 mV DC measurement range to interface with other accessories
• 1000 μF capacitance measurement
• Work safely and conveniently

• The 376 FC clamp carries a CAT III 1000 V, CAT IV 600 V safety rating, designed to offer you the highest possible protection in a test tool.

The included 18-inch or 36-inch iFlex flexible current probe provides easier access to large conductors in tight spaces. The flexible probe:

• Expands the measurement range to 2500 A AC
• Allows frequency measurement to 500 Hz with body jaw and iFlex

Features

Model

• Connect your meter to your smartphone with Fluke Connect Measurements 

• Read the measured values via mobile phone at a safe distance. The instrument assumes all risks, and the staff only need to wear less personal protective equipment.

• Record the measurement results directly to the mobile phone and the Cloud.

• While collecting intermittent faults, use the recording function of Fluke 376 FC to perform other tasks.

• Create reports on site and share them instantly via email, or use ShareLive™ video calls for real-time conversations.

•  The iFlex flexible current probe expands the measurement range of alternating current up to 2500 A; it enables measurements with large-size conductors in narrow spaces (included).

• TPAK magnetic strap (included)

• The integrated VFD low-pass filter can be used for accurate measurements of drive motors.

• Adopting proprietary surge measurement technology, it can filter out noise and accurately capture the starting current of the motor through current protection monitoring.

• CAT IV 600 V, CAT III 1000 V safety levels

•  Three-year warranty

•  Soft carrying case

Model: Fluke 376 FC 

Includes:

• Fluke 376 FC True-RMS Clamp Meter

• 18-inch iFlex® Flexible Current Probe

• TPAK magnetic hanging strap

• TL75 Test Leads

• Two AA batteries (Installed)

• Soft carrying case

• Coated instruction card

• Safety information sheet

Specification

General Specifications
AC Current via Jaw
Range				999.9 A
Resolution				0.1 A
Accuracy				2% ±5 digits (10 Hz to 100 Hz)
				2.5% ±5 digits (100-500 Hz)
Crest Factor (50 Hz/60 Hz)				3 @ 500 A
				2.5 @ 600 A
				Add 2% for C.F. >2
AC Current via Flexible Current Probe
Range				2500 A
Resolution				0.1 A (≤ 600 A)
				1 A (≤ 2500 A)
Accuracy				3% ±5 digits (5 – 500 Hz)
Crest Factor (50/60Hz)				3.0 at 1100 A
				2.5 at 1400 A
				1.42 at 2500 A
				Add 2% for C.F. > 2
Flexible current probe
		i2500-10 Flex		i2500-18 Flex			i2500-36 Flex

A
Distance from Optimum	0.5 in (12.7 mm)		1.4 in (35.6 mm)			4.8 in (122.2 mm)
Error	±0.5 %		±0.5 %			±0.5 %
B
Distance from Optimum	0.8 in (20.3 mm)		2.0 in (50.8 mm)			5.3 in (133.6 mm)
Error	±1.0 %		±1.0 %			±1.0 %
C
Distance from Optimum	1.4 in (35.6 mm)		2.5 in (63.5 mm)			5.8 in (147.6 mm)
Error	±2.0 %		±2.0 %			±2.0 %
Measurement uncertainty assumes centralized primary conductor at optimum position, no external electrical or magnetic field, and within operating temperature range.
DC Current
Range		999.9 A
Resolution		0.1 A
Accuracy		2% ±5 digits
AC Voltage
Range		1000 V
Resolution		0.1 V (≤600.0 V)
		1 V (≤1000 V)
Accuracy		1% ±5 digits (20 Hz to 500 Hz)
mV dc

mV dc
Range		500.0 mV
Resolution		0.1 mV
Accuracy		1% ±5 digits
Frequency via Jaw
Range		5.0 Hz to 500.0 Hz
Resolution		0.1 Hz
Accuracy		0.5% ±5 digits
Trigger level		5 Hz to 10 Hz, ≥10 A
		10 Hz to 100 Hz, ≥5 A
		100 Hz to 500 Hz, ≥10 A
Frequency via Flexible Current Probe
Range		5.0 Hz to 500.0 Hz
Resolution		0.1 Hz
Accuracy		0.5% ±5 digits
Trigger level		5 Hz to 20 Hz, ≥25 A
		20 Hz to 100 Hz, ≥20 A
		100 Hz to 500 Hz, ≥25 A
Resistance
Range		60 kΩ

Resolution		0.1 Ω (≤600 Ω)
		1 Ω (≤6000 Ω)
		10 Ω (≤60 kΩ)
Accuracy		1% ±5 digits
Capacitance
Range		1000 μF
Resolution		0.1 μF (≤ 100 μF)
		1 μ F (≤ 1000 μF)
Accuracy		1% ±4 digits
Mechanical Specifications
Maximum voltage between any terminal and earth ground		1000 V
Batteries		2 AA, NEDA 15A, IEC LR6
Operating temperature		-10 °C to +50 °C
Storage temperature		-40 °C to +60 °C
Operating humidity - non-condensing (< 10°C)		≤90% RH (at 10 °C to 30 °C)
		≤75% RH (at 30 °C to 40 °C)
		≤45% RH (at 40 °C to 50 °C)
Operating altitude		2000 m
Storage altitude		12,000 m
Size (L x W x H)		249 x 85 x 45 mm

Weight		395 g
Jaw opening		34 mm
Flexible current probe diameter		7.5 mm
Flexible current probe cable length (head to electronics connector)		1.8 m
Safety		IEC 61010-1, Pollution Degree 2
		IEC 61010-2-032: CAT III 1000 V / CAT IV 600 V
		IEC 61010-2-033:CAT III 1000 V / CAT IV 600 V
IP rating		IEC 60529: IP30, non-operating
Radio Frequency Certification FCC ID		T68-FBLE IC:6627A-FBLE
Electromagnetic Compatibility (EMC)
International		IEC 61326-1: Portable, Electromagnetic Environment, IEC 61326-2-2
		CISPR 11: Group 1, Class A
		Group 1: Equipment has intentionally generated and/or uses conductively-coupled radio frequency energy that is necessary for the internal function of the equipment itself.
		Class A: Equipment is suitable for use in all establishments other than domestic and those directly connected to a low-voltage power supply network that supplies buildings used for domestic purpose. There may be potential difficulties in ensuring electromagnetic compatibility in other environments due to conducted and radiated disturbances. Emissions that exceed the levels required by CISPR 11 can occur when the equipment is connected to a test object.
Korea (KCC)		Class A Equipment (Industrial Broadcasting & Communication Equipment)
		Class A: Equipment meets requirements for industrial electromagnetic wave equipment and the seller or user should take notice of it. This equipment is intended for use in business environments and not to be used in homes.
USA (FCC)		47 CFR 15 subpart B. This product is considered an exempt device per clause 15.103.
Temperature coefficients		Add 0.1 x specified accuracy for each degree C above 28 °C or below 18 °C

Company Profile

BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.

Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10,000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.

It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.

The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.

BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.

History of BNSENS Company:

BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.

1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.

2002: The company expanded its product line and launched temperature sensors

2005: Started producing high-precision pressure sensors for the test and measurement market

2006: Became an official authorized agent of Honeywell

2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved

2010: Became a supplier of Emerson

2011: We started selling SICK sensors

2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC

2015: Cooperated with Siemens in Vietnam

2017: The factory moved to Nanjing High-tech Zone

2019: Became a national high-tech enterprise in China

2023: We started selling products from Infineon and Rohm

2025: We started cooperating with Fluke

BNSENS,The Future Starts Here.