| Customization: | Available |
|---|---|
| Measuring Medium: | Temperature |
| Customized: | Customized |
|
Still deciding? Get samples of US$ 10/Piece
Request Sample
|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The TT100 is a two-wire temperature transmitter that sets the measuring range through a dial switch, and also has a PC programmable function. It can accept thermal resistance signal input, linearize the input signal, output 4~20mA standard signal, and transmit it to DCS, PLC and other system control equipment;
Features:
1,Circuit design using lightning protection and electrical fast transient (burst group) interference
2,Ultra-low power design of internal circuit
3,Adjust the position of the DIP switch to adjust the range
4,With PC programmable function
| Configuration method | DIP switch + PC programmable (Dual mode) |
| Power supply debugging | No need |
| Input signal | Pt100, Cu50,Pt1000 |
| Measuring range | -200...+850ºC |
| Conversion accuracy | ≤0.2% or 0.2K |
| Output signal | Analog 4~20mA (two-wire system) |
| Alarm | When the sensor is faulty (open circuit or short circuit), the output drops to ≤3.6mA or the output rises to ≥21.5mA |
| Maximum load | (V power supply-9V) / 0.025A (output current) |
| Voltage | 9-30V DC |
| Response time | 1S |
| Lightning protection | ±4000V (≤5 times) |
| Anti-burst group | ±4000V |
| Anti-radio frequency interference | >10V/m(80MHz~1000MHz) |
| Ambient temperature | -40~+85ºC |
| Temperature drift | 0.008%FS1/ºC |
| Long-term stability | ≤0.1ºC/year or 0.05%/year |
){kind=link}