-100kpa~0~10kpa… 2.5MPa Bnpc10 Silicon Piezoresistive Pressure Core of Pressure Sensor 1.5mA 10V

• Customization: Available
• Type: Piezoresistive Pressure Sensor
• Component: SemiConductor Type
• Model NO.: BNPC10
• Output Signal Type: Analog Type
• Material: Stainless Steel
• Scale Range: -100kpa~0~10kpa…2.5MPa
• Pressure Type: Gauge Pressure, Absolute Pressure, Sealing Pressur
• Power Supply: Constant Current : 1.5mA 10V (Recommended )
• Insulation Resistance: ≥ 250Ω/250VDC
• Diaphragm Material: Stainless Steel316L

Product Description

BNPC10 silicon piezoresistive pressure core is the core part of pressure sensor and pressure transmitter, as a high performance pressure sensitive element, it can be easily amplified and assembled into standard signal output transmitter.

PC10 core body is diffused silicon pressure sensitive chip packages to the 316 l stainless steel shell, plus pressure by sealed inside stainless steel diaphragm, silicone oil, is passed on to the sensitive chip sensitive chips don't direct contact with the measured medium, pressure measurement of all solid state structure, so the product can be applied to various occasions, including harsh corrosive medium environment.

The PC10 core is pressure sealed with fluororubber "O" ring for easy installation.

The company can also according to the needs of users, to undertake special requirements of sensors, such as all welded structure, wide temperature compensation, high reliability, strong impact resistance and vibration resistance of pressure sensors, especially for national defense equipment supporting.

Features:

1. Constant current/constant voltage excitation

2. High reliable imported pressure chip

3. Wide temperature compensation

4. Constant voltage compensation can realize integrated output

5.Compensation board irrigation glue, excellent moisture resistance

6.19 mm standard OEM Φ pressure sensitive element

7.Tantalum film and ha 'ite alloy C structure are optional

8.High performance, all solid state, high reliability

9.18-month warranty period

 

Product Parameters

 

Scale   range	-100kPa~0~10KPa…2.5Mpa
Pressure   type	Gauge pressure, absolute pressure, sealing pressure
Power   supply	Constant current is recommended at 1.5mA;10V is   recommended at constant pressure
Input impedance	Constant current: 2kΩ~5kΩ
	Constant pressure: 3   k Ω ~ 18 k Ω
Electrical connections	Gold plated kovar pin or silicone soft lead
Compensated temperature range	Constant current: 0ºC ~ 60ºC (≤35kPa), -10ºC ~ 70ºC   (other range);Constant pressure: -20ºC ~ 85ºC
Operating temperature range	-45~125ºC
Storage temperature range	-40~125ºC
Insulation resistance	≥ 250Ω/250VDC
Response time	≤1ms(Rise to 90%FS)
Pressure medium	All liquids and gases compatible with 316L
Mechanical vibration	20g(20-5000HZ)
Impact	100g(10ms)
Service life	10×106 (cycles)
Structural   performance index
Diaphragm material	Stainless steel316L
Shell material	Stainless steel316L
Perfusion liquid	Silicone oil
Sealing ring	Cyanogen butadiene or fluoro rubber

Note:
• Calculated based on BFSL least squares.
• Within the compensation temperature range, 0ºC ~ 60, -10ºC~70ºC refer to 30ºC; -20ºC~85ºC refer to 32.5ºC.
• After high and low temperature, return to the reference temperature.

 

Dimensions

 

Pressure Range Table

 

Nomenclature

 

 

Disclaimer