Fluke 317 Fluke 319 Clamp Meter

• Customization: Available
• Brand: Fluke
• Certification: CE, ISO, RoHS
• Model NO.: Fluke 317
• Product Type: Clamp Meter
• Condition: Original New
• Digital Display: 6000 count resolution
• Clamp Opening Size: 37 mm (1.45 in)
• Jaw Diameter: 37 mm (1.45 in)
• Dimensions: 162.4 x 58.25 x 30.5 mm (6.39 x 2.29x 1.20 in)
• Size: 249 x 85 x 45 mm
• Weight: ∼384 g (with batteries)
• Battery: 3 AAA IEC LR03 batteries
• Operating Temperature: -10 °C to 50 °C (14 °F to 122 °F)
• Transport Package: Carton
• Trademark: Fluke
• Origin: China

Product Description

Product Description

The Fluke 317 and 319 are hand-held, battery-operated clamp meters (the Product) that measure:

• ac and dc current
• ac and dc voltage
• resistance
• continuity
• frequency

The Product ships with: 

• test leads
• soft case
• three AAA batteries (installed)

Safety Information

To prevent possible electrical shock, fire, or personal injury:
• Read all safety information before you use the Product.
• Carefully read all instructions.
• Do not alter the Product and use only as specified, or the protection supplied by the Product can be compromised.
• Do not use the Product if it operates incorrectly.
• Do not use the Product if it is altered or damaged.
• Use the Product only as specified, or the protection supplied by the Product can be compromised.

• Limit operation to the specified measurement category, voltage, or amperage ratings.
• Do not touch voltages >30 V ac rms, 42 V ac peak, or 60 V dc.
• Do not exceed the Measurement Category (CAT) rating of the lowest rated individual component of a Product, probe, or accessory.
• Do not use the Product around explosive gas, vapor, or in damp or wet environments.
• Use only correct measurement category (CAT), voltage, and amperage rated probes, test leads, and adapters for the measurement.
• Do not use the HOLD function to measure unknown potentials. When HOLD is turned on, the display does not change when a different potential is measured. 
• Do not work alone.
• Do not apply more than the rated voltage, between the terminals or between each terminal and earth ground.

• Comply with local and national safety codes. Use personal protective equipment (approved rubber gloves, face protection, and flame-resistant clothes) to prevent shock and arc blast injury where hazardous live conductors are exposed.
• Replace the batteries when the low battery indicator shows to prevent incorrect measurements.

• Keep fingers behind the finger guards on the probes.
• Measure a known voltage first to make sure that the Product operates correctly.
• Connect the common test lead before the live test lead and remove the live test lead before the common test lead.
• Remove all probes, test leads, and accessories that are not necessary for the measurement.
• Before each use, examine the Product. Look for cracks or missing pieces of the clamp housing or output cable insulation. Also look for loose or weakened components. Carefully examine the insulation around the jaws.
• Do not use test leads if they are damaged. Examine the test leads for damaged insulation, exposed metal, or if the wear indicator shows. Check test lead continuity.
• Disconnect power and discharge all high-voltage capacitors before you measure resistance, continuity, capacitance, or a diode junction.
• Hold the Product behind the tactile barrier. 
• Do not use the Product if the wear indicator in the jaw opening is not visible. 
• Do not operate the Product with covers removed or the case open. Hazardous voltage exposure is possible.
• Do not use in CAT III or CAT IV environments without the protective cap installed on test probe. The protective cap decreases the exposed probe metal to <4 mm. This decreases the possibility of arc flash from short circuits. For safe operation and maintenance of the product:
• Remove batteries to prevent battery leakage and damage to the Product if it is not used for an extended period.
• Be sure that the battery polarity is correct to prevent battery leakage.
• Repair the Product before use if the battery leaks.
• Have an approved technician repair the Product.
• Remove the input signals before you clean the Product.

Specification

DigitalDisplay	6000 count resolution
ClampOpeningSize	37 mm(1.45 in)
JawDiameter	37 mm(1.45 in)
Dimensions	162.4 mmx58.25 mmx30.5 mm (6.39 inx2.29 inx1.20 in)
Weight	~384g(with batteries)
Battery	3 AAA IEC LR03 batteries
Temperature
Operating	-10℃ to 50℃(14F to 122°F)
Storage	-40℃ to 60℃(-40 F to 140 °F)
Relativehumidity	Non condensing<10℃(<50F) 90%,10℃ to 30℃(50 F to 86°F) 75%,30℃ to 40℃(86F to 104°F) 45%40℃ to 50℃(104F to 122°F) (WithoutCondensation)
Altitude
Operating	2000 m
Storage	12000 m
IPRating	IP40
Safety	IEC61010-1:Pollution Degree 2 IEC61010-2-032:CATIⅢ,600V

Company Profile

BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.

Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10,000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.

It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.

The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.

BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.

History of BNSENS Company:

BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.

1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.

2002: The company expanded its product line and launched temperature sensors

2005: Started producing high-precision pressure sensors for the test and measurement market

2006: Became an official authorized agent of Honeywell

2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved

2010: Became a supplier of Emerson

2011: We started selling SICK sensors

2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC

2015: Cooperated with Siemens in Vietnam

2017: The factory moved to Nanjing High-tech Zone

2019: Became a national high-tech enterprise in China

2023: We started selling products from Infineon and Rohm

2025: We started cooperating with Fluke

BNSENS,The Future Starts Here.