|
Gas Measured
|
Nitrogen Trifluoride (NF3) |
|
Cartridge Part Number
|
MIDAS-E-XHF |
|
Sensor Technology
|
3 electrode electrochemical cell |
|
Measuring Range
|
NF3 0 - 40ppm |
|
Minimum Alarm 1 Set Point
|
4ppm |
|
Lower Detection Limit
|
3.6ppm |
|
Linearity
|
<± 20% of measured value
|
|
Repeatability
|
<± 10% of measured value |
|
Resolution
|
0.2ppm |
|
Response Time t62.5
|
≤ 110 seconds |
Operating Temperature
Effect of Humidity
Zero
Sensitivity
|
0°C to +40°C (32°F to 104°F)
<± 0.003ppm / % RH
<± 1% of measured value / % RH
|
|
Operating Humidity
|
10 to 90% RH
|
|
Operating Pressure
|
90 - 110kPa
|
| Effect of Position |
No effect in typical application
|
|
Long Term Drift
Zero
Sensitivity
|
No Drift
< 15% of measured value / year
|
|
Calibration Gas
|
Hydrogen Fluoride (HF)
|
|
Bump Test Gas
|
Chlorine (Cl2)
|
|
Warm Up Time
|
< 20 minutes
|
|
Storage Temperature
|
+5°C to +25°C (+41°F to +77°F)
|
The sensor data listed is based on ideal test environment; observed performance may vary based on the actual monitoring system and the sampling conditions
employed.
Separate Pyrolyzer module (MIDAS-T-NP1) required with the Nitrogen Triflouride sensor cartridge to detect gas calibration every 6 months, and ensure the constant temperature of the installation point is in NF3 by thermal breakdown. To maintain stated performance, it is recommended to perform 50 - 104ºF(10 - 40ºC) and the humidity is in 30 - 70 %RH.
Otherwise, more frequent bump testing or calibration will be required to confirm working specifications.
Cross Sensitivities
Each Midas® sensor is potentially cross sensitive to other gases and this may cause a gas reading when exposed to other gases than those originally designated. The table below presents typical readings that will be observed when a new sensor cartridge is exposed to the cross sensitive gas (or a mixture of gases containing the cross sensitive species).
| Gas Measured |
Chemical Formula |
Concentration Applied(ppm) |
Reading (ppm HF) |
| Chlorine |
Cl2 |
1 |
1.5 |
| Diborane |
B2H6 |
1 |
0 (Negative Drift) |
| Hydrogen Chloride |
HCI |
4 |
3.2 |
| Hydrogen Sulfide |
H2S |
25 |
0 (Negative Drift) |
| Nitrogen Dioxide |
NO2 |
5 |
0.65 |
| Phosphine |
PH3 |
1 |
0 (Negative Drift) |
| Sulfur Dioxide |
SO2 |
50 |
0 (Negative Drift) |
| Arsine |
ASH3 |
1 |
0 |
| Carbon Monoxide |
CO |
2000 |
0 |
| Hydrogen |
H2 |
20000 |
0 |
| Iso Propanol |
C3H7OH |
500 |
0 |
| Methanol |
CH3OH |
500 |
0 |
| Silane |
SIH4 |
10 |
0 |
| Ammonia |
NH3 |
50 |
0 |
| Ozone |
O3 |
0.2 |
0 |
| Ethylene Oxide |
C2H4O |
20 |
0 |
| Nitric Oxide |
NO |
50 |
0 |
| Carbon Dioxide |
CO |
10000 |
0 |
https://bnsens.en.made-in-china.com/product-group/bopTdXVcfIWz/Gas-Sensor-and-Flame-Detector-catalog-1.html?pv_id=1ii6duvlr5aa&faw_id=1ii6e5nca71b
BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.
Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10, 000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.
It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.
The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.
BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: Magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.
History of BNSENS Company:
BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.
1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.
2002: The company expanded its product line and launched temperature sensors
2005: Started producing high-precision pressure sensors for the test and measurement market
2006: Became an official authorized agent of Honeywell
2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved
2010: Became a supplier of Emerson
2011: We started selling SICK sensors
2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC
2015: Cooperated with Siemens in Vietnam
2017: The factory moved to Nanjing High-tech Zone
2019: Became a national high-tech enterprise in China
2023: We started selling products from Infineon and Rohm
BNSENS, The Future Starts Here.
Audited Supplier 
){kind=link}