0~20kpa… 2.5MPa Pd610 Differential Pressure Sensor with OEM Silicon Piezoresistive Differential Pressure Oil Filled Core

• Customization: Available
• Material: Stainless Steel
• Thread Type: Customizable
• Model NO.: PD610
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Scale Range: 0~20kpa…2.5MPa
• Static Pressure: 20MPa(Max.)
• Power Supply: 24VDC 12VDC
• Output Signal: 4~20mA 1~5V 0~5V
• Pressure Overload: 150%Fs

Product Description

PD610 differential pressure transmitter is assembled by OEM silicon piezoresistive differential pressure oil filled core.The shell is all stainless steel structure, with strong corrosion resistance. The two pressure interfaces are threaded connections, which can be installed directly on the measuring pipe or connected through the pressure pipe.

PD610 series has standard voltage and current output, which can be easily installed and used. It is widely used in process control, aviation, aerospace, automobile, medical equipment, HVAC and other fields, such as differential pressure, liquid level and flow measurement and control.

 

Features:

1. 316L stainless steel isolation diaphragm structure

2. Measure the differential pressure

3. Easy installation

4. The zero and full range can be externally adjusted

5. With short circuit protection and reverse polarity protection

6. Anti impact, anti vibration, anti electromagnetic compatibility

7. It can be customized according to customer requirements

Application:

• Equipment supporting, scientific experiments, precision instruments, water supply and drainage, power plant differential pressure, flow ...
 

Product Parameters

Scale range	0~20kPa…2.5MPa
Static pressure	20MPa(Max.)
Pressure type	Differential   pressure
Power supply	24VDC,12VDC
Output signal	4~20mA,1~5V,0~5V
Working temperature	-20ºC~85ºC
Medium temperature	-20ºC~85ºC
Storage temperature	-40ºC~125ºC
Zero temperature drift	±1.5%FS(@-20ºC~85ºC)
Sensitivity drift	±1.5%FS(@-20ºC~85ºC)
Pressure overload	150%FS
Mechanical vibration	20g(20~5000HZ)
Impact	100g(11ms)
Comprehensive accuracy	0.5 level
Insulation resistance	100MΩ/250VDC
Response time	≤1ms(rise to 90%FS)
Long-term stability	±0.2%FS/year
Protection grade	IP65
Material	Shell low copper aluminum alloy;Isolation diaphragm   316L
Medium compatible	Compatible with 316L stainless steel
Static pressure influence	±0.5% FS(@1MPa)

 

External Structure

 

Range Selection

 

Nomenclature

NOTE
• (1) In order to ensure the safe and reliable operation of the transmitter, it is recommended to install a three valveqroup between the measured point and the transmitter to ensure that the measured medium is slowly andevenly added to the positive and negative pressure chambers of the differential pressure transmitter.
• (2) During installation, it is recommended that the pressure connections at both ends be level to minimize the impactof the installation position on the product.
• (3) When selecting, please note that the static pressure of the measured pressure point does not exceed 20MPa,and the overpressure on the positive and negative pressure chambers of the transmitter cannot exceed theproduct's specified value.


 

Disclaimer