High Precision Pressure Sensor Transducer Transmitter

• Customization: Available
• Type: Normal Pressure Transmitter
• Structure Type: Diffused Silicon Pressure Transmitter
• Model NO.: bnptm340
• Pressure range: -100kPa~0~10kPa…150MPa
• IP Rating: IP65
• Certification: CE
• Customized: Customized
• Pressure type: Gage pressure
• Power supply: 24V
• Output Signal: 4-20mA, 0-5V, 1-5V, 0-10V
• Comprehensive Accuracy: 0.5 Level
• Working temperature: -40ºC~85ºC,-40ºC~120ºCoptional
• Compensation temperature: 0ºC~70ºC,-20ºC~85ºC optional
• Storage temperature: -40ºC~125ºC
• Zero Temperature Error: 0.5%Fs/10ºC
• Full range temperature error: 0.5%FS/10ºC
• Pressure overload: 135%FS(range≤15MPa); 120%FS(range≥15MPa)
• Destroy the pressure: 200%FS(range≤10MPa);150%FS(range≥10MPa)
• Load capacity: ≥[(power supply voltage-6.5V)/0.02A]Ω
• Mechanical life: ≥5 million pressure cycles
• Insulation resistance: ≥500MΩ /1000VDC
• Long-term stability: ±0.25%FS/year
• Trademark: BNSENS
• Origin: China
• Production Capacity: 100000

Product Description

Product Description

BNPTM340 without cavity flat membrane pressure transducer foil strain gauge with high precision, matched with a variety of amplifier circuit with distinctive features, such as anti-jamming, high temperature resistant, safety explosion-proof type, etc., make the type is suitable for a variety of working conditions, and no cavity structure characteristics, especially suitable for measuring the viscosity and slurry, cement, crude oil has a particle fluid industry such as pressure measurement occasions.

Features:

1. High-precision foil strain gauge

2. No cavity measurement diaphragm

3. Wear resistance

4. Wide temperature range

5. Large DIN connector, easy installation, high reliability

6. Improved and optimized circuit and installation structure, improved anti-vibration ability and stability

Application:
Supporting heavy equipment, high pressure, high load, high impact, frequently overloaded areas 

Product Parameters

 

Scale   range	-100kPa~0~10kPa…150MPa
Pressure   type	Gage pressure
Power supply	24V
Output signal	4~20mA,0~5V,1~5V,0~10V
Working temperature	-40ºC~85ºC,-40ºC~120ºC optional
Compensation temperature	OºC~70ºC,-20ºC~85ºC  optional
Storage temperature	-40ºC~125ºC
Zero temperature error	0.5%FS/10ºC
Full range temperature error	0.5%FS/10ºC
Pressure overload	135%FS(range≤15MPa);120%FS(range≥15MPa)
Destroy the pressure	200%FS(range≤10MPa);150%FS(range≥10MPa)
Load capacity	≥[(power supply voltage-6.5V)/0.02A]Ω
Mechanical life	≥5 million pressure cycles
Comprehensive accuracy	0.5 level
Insulation resistance	≥500MΩ /1000VDC
Long-term stability	±0.25%FS/year
Medium compatible	Liquid or gas compatible with 17-4PH stainless steel

 

External Structure

 

Installation Instructions

(1)This product can be directly installed on the pipeline (or on the container wall) by using the M20 × 1.5 interface.The front end of the thread should be sealed with a copper pad or nylon pad. In addition, the flat membranesensing head of the threaded front end of the cavityless pressure transmitter cannot touch the front end and the side wall of the mounting portion. Otherwise it will affect the performance of the pressure transmitter.
(2)When measuring a medium with an excessively high temperature, an impulse pipe or other cooling device should be used to reduce the temperature to the temperature range of the pressure transmitter.
(3)When installing in the open air, the transmitter should be placed in a dry and ventilated place as much as possible to avoid direct exposure to strong light and rain, otherwise it will cause poor performance or failure.
(4)If there is no output or abnormal output of the transmitter after installation, please check:
a.Whether the electrical connection is accurate and firm;
b.Is the power supply voltage too low and the load resistance too large?
 

 

Pressure Range

Nomenclature

NOTE

(1)The standard cable is 1.5 meters, and the excess is charged according to the length.

(2) Please pay attention to the compatibility between the testing medium and the product contact part when selecting.

(3) If there are special requirements for product appearance and performance parameters, our company can provide

customization.

 

Disclaimer