SLATE™ brings configurable safety and programmable logic together into one single platform. The platform can easily be customized for almost any requirement or application-offering virtually limitless development opportunities with far less complexity.
The R8001S1051 UV Shutter-Check module responds to an ultraviolet signal from an ultraviolet type flame detector to indicate the presence of flame. This flame amplifier is used with the C7061 detector series.
Features
• Module display for flame signal strength
• 0.0 to 8.0 VDC flame signal strength reading range flame signal strength reading range
Specifications
Electrical Ratings:
Base Voltage and Frequency
24 VDC (± 15%),
24 VAC (± 15%), 50/60 Hz,
85-264 VAC, 50/60 Hz
Environmental Ratings
Ambient Temperature:
Operating: -20°F to +150°F (-29°C to +66°C).
Shipping: -40°F to +150°F (-40°C to +66°C).
Humidity: 95% continuous, noncondensing.
Vibration: 0.5G environment
Dimensions: Refer to Fig. 1.
Weight: 2 lb 1 oz (0.94 Kg)
Approvals
Underwriters Laboratories Inc. Listed, File: MP268
IRI Acceptable
Federal Communications Commission: Part 15, Class A
Must be mounted inside a grounded metal enclosure.
Mounting
DIN Rail (See )
Required Components
R8001A1001 SLATE Base Controller
R8001S9001 SLATE Sub-Base Module
LED Array
There are four LEDs on the front of the Shutter-Check Flame Amp module that provide quick identification of the system status and any problems that might occur. The status is broadcast to other modules on the platform bus in case they are affected by the inoperable modules. See Table 1 for descriptions.