Honeywell SSCSDRN010MD2A3 SSC Series TruStability® Board Mount Pressure Sensors

• Customization: Available
• Output Signal Type: Digital Type
• Measuring Medium: Gas
• Model NO.: SSCSDRN010MD2A3
• Certification: ISO
• Manufacturer: Honeywell
• Product Category: Board Mount Pressure Sensors
• Condition: Original New
• Pressure Type: Differential
• Pressure Port: Dual radial barbed ports, opposite sides
• Pressure Range: ±10 mbar
• Accuracy: ± 0.25 % FSS
• Mounting Style: Through Hole
• Operating Supply Voltage: 3.3 Vdc ±0.3 Vdc
• Operating Temperature: -40 °C to 85 °C
• Supply Current: 3.1 mA typ
• Transport Package: Carton
• Trademark: Honeywell
• Origin: China

Product Description

The TruStability® Standard Accuracy Silicon Ceramic (SSC) Series is a piezoresistive silicon pressure sensor offering a ratiometric analog or digital output for reading pressure over the specified full scale pressure span and temperature range.
 

The SSC Series is fully calibrated and temperature compensated for sensor offset, sensitivity, temperature effects, and nonlinearity using an on-board Application Specific Integrated Circuit (ASIC). Calibrated output values for pressure are updated at

approximately 1 kHz for analog and 2 kHz for digital.
 

The SSC Series is calibrated over the temperature range of -20 °C to 85 °C [-4 °F to 185 °F]. The sensor is characterized for operation from a single power supply of either 3.3 Vdc or 5.0 Vdc.
 

These sensors measure absolute, gage, or differential pressures. The absolute versions have an internal vacuum reference and an output value proportional to absolute pressure. Gage versions are referenced to atmospheric pressure and provide an output proportional to pressure variations from atmosphere. Differential versions allow measurement of pressure between two pressure ports.
 

The TruStability® pressure sensors are intended for use with non-corrosive, non-ionic gases, such as air and other dry gases. Available options extend the performance of these sensors to non-corrosive, non-ionic liquids for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.
 

All products are designed and manufactured according to ISO 9001 standards.
 

Features and Benefits

Proprietary Honeywell technology

Combines high sensitivity with high overpressure and burst pressure while providing industry leading stability-performance factors that are difficult to achieve in the same product; this gives the customer more flexibility in sensor implementation and reduces the customer design requirements for protecting the sensor without sacrificing the ability to sense very small changes in pressure.
 

PROTECTED BY MULTIPLE GLOBAL PATENTS Industry-leading long-term stability

Even after long-term use and thermal extremes, the sensor's stability remains best in class:

• Minimizes system calibration needs.

• Improves system performance.

• Helps support system uptime by minimizing the need to service or replace the sensor during its application life.
 

Total Error Band (TEB)

Honeywell specifies TEB-the most comprehensive, clear, and meaningful measurement-that provides the sensor's true performance over a compensated range of -20 °C to 85 °C [-4 °F to 185 °F] (see Figure 1):

• Minimizes individually testing and calibrating every sensor, decreasing manufacturing time and process costs.

• Improves system accuracy.

• Provides enhanced sensor interchangeability-there is minimal part-to-part variation in accuracy
 

Industry-leading accuracy

Extremely tight accuracy of ±0.25 %FSS BFSL (Full Scale Span Best Fit Straight Line) reduces software needs to correct system inaccuracies, minimizing system design time:

• Avoids additional customer calibration.

• Helps to improve system efficiency.

• Often simplifies software development.
 

High burst pressures

• Promotes system reliability and reduces potential system downtime.

• Can simplify the design process.
 

High working pressure ranges

Allows ultra-low pressure sensors to be used continuously well above the calibrated pressure range.
 

Industry-leading flexibility

Modular, flexible design with many package styles (with the same industry-leading stability), pressure ports, and options simplify integration into the device manufacturer's application.
 

Wide variety of pressure ranges

From ±1.6 mbar to ±10 bar | ±160 Pa to ±1 MPa | ±0.5 inH2O to ±150 psi provide support for many unique applications.
 

Meets IPC/JEDEC J-STD-020D.1 Moisture Sensitivity Level 1 requirements

• Allows the customer to avoid the thermal and mechanical damage during solder reflow attachment and/or repair that lesser rated products would incur.

• Allows unlimited floor life when stored as specified (<30 ºC/85 %RH), simplifying storage and reducing scrap.

• Never requires lengthy bakes prior to reflow.

• Stable and usable shortly after reflow process allows for lean manufacturing.
 

OPTIONAL Internal diagnostic functions

• May reduce the need for redundant sensors in the system.

• Detects most internal failures including burst sensors.
 

Energy efficient

Extremely low power consumption (less than 10 mW, typ.):

• Reduces system power requirements.

• Enables extended battery life.

• Optional sleep mode available upon special request.
 

Output: ratiometric analog; I 2 C- or SPI-compatible 14-bit digital output (min. 12-bit sensor resolution)

Accelerates performance through reduced conversion requirements and the convenience of direct interface to microprocessors.
 

Small size

Miniature 10 mm x 10 mm [0.39 in x 0.39 in] package is very small when compared to many board mount pressure sensors:

• Occupies less area on the PCB.

• Typically allows for easy placement on crowded PCBs or in small devices.
 

REACH and ROHS compliant

Liquid media option

• Provides robustness in environments with condensing humidity.

• Compatible with a variety of non-ionic fluids.

• Available for pressure ranges above 40 mbar | 4 kPa | 20 inH2 0.

Potential Applications
MEDICAL

• Airflow monitors

• Anesthesia machines

• Blood analysis machines

• Gas flow instrumentation

• Kidney dialysis machines

• Oxygen concentrators

• Pneumatic controls

• Respiratory machines

• Sleep apnea equipment

• Ventilators

• Spirometers

• Nebulizers

• Hospital room air pressure

INDUSTRIAL

Barometry

• Flow calibrators

• Gas chromatography

• Gas flow instrumentation

• HVAC

• Life sciences

• Pneumatic control

• VAV (Variable Air Volume) control

• Clogged HVAC filter detection

• HVAC transmitters

• Indoor air quality
 

Digital operating Specifications
Characteristic		Min.	typ.		Max.	Unit
Supply voltage (Vsupply):^1, 2, 3       pressure ranges >60 mbar | 6 kPa | 1 psi:         3.3 Vdc         5.0 Vdc       pressure ranges <40 mbar | 4 kPa | 20 inH2O:         3.3 Vdc         5.0 Vdc		3.0 4.75 3.27 4.95	3.3 5.0 3.3 5.0		3.6 5.25 3.33 5.05	Vdc
Supply current:      3.3 Vdc      5.0 Vdc Operating temperature range^4 Compensated temperature range^5 Startup time (power up to data ready) Response time SPI/I2C voltage level:       low       high Pull up on SDA/MISO, SCL/SCLK, SS Accuracy^6 Output resolution		- - -40 [-40] -20 [-4] - - - 80 1 - 12	3.1 3.7 - - - 0.46 - - - - -		3.9 4.6 85 [185] 85 [185] 3 - 20 - - ±0.25 -	mA °C [°F] °C [°F] ms ms %Vsupply kOhm %FSS BFSL^8 bits
Orientation sensitivity (±1 g):^7, 9       pressure ranges <40 mbar | 4 kPa | 20 inH2O       pressure ranges <2.5 mbar | 250 Pa | 1 inH2O		- -	±0.1 ±0.2		- -	%FSS^8

1Sensors are either 3.3 Vdc or 5.0 Vdc based on the catalog listing selected.

2 Ratiometricity of the sensor (the ability of the device output to scale to the supply voltage) is achieved within the specified operating voltage.

3 The sensor is not reverse polarity protected. Incorrect application of supply voltage or ground to the wrong pin may cause electrical failure.

4 Operating temperature range: The temperature range over which the sensor will produce an output proportional to pressure.

5 Compensated temperature range: The temperature range over which the sensor will produce an output proportional to pressure within the specified performance limits.

6 Accuracy: The maximum deviation in output from a Best Fit Straight Line (BFSL) fitted to the output measured over the pressure range at 25 °C [77 °F]. Includes all errors due to pressure non-linearity, pressure hysteresis, and non-repeatability.

7 Orientation sensitivity: The maximum change in offset of the sensor due to a change in position or orientation relative to Earth's gravitational field.

8 Full Scale Span (FSS): The algebraic difference between the output signal measured at the maximum (Pmax.) and minimum (Pmin.) limits of the pressure range.

9 Insignificant for pressure ranges above 40 mbar | 4 kPa | 20 inH2O.

 

 

 

 

BNSENS (Nanjing) Sensor Technology Co., Ltd. is located in Nanjing, China. It is a high-tech enterprise specializing in the development, manufacturing and trade of sensor products. The company has brought together a group of outstanding technical experts in various fields such as automation, electronics, machinery and computers. All employees of the company have college degrees or above. It adopts the world-class management and operation model and 6 sigma quality system. At present, the company's main products are pressure, liquid level, flow, current, switches, etc. The company's users are all over the country, and some products have been exported to Japan, South Korea and Southeast Asia.

Since its inception, the company has been based on the technical accumulation and management standards of American sensor giants. It is composed of senior engineers and managers who have served in multinational companies for many years, and has rapidly developed various pressure sensors, transmitters, liquid level, flow meters, pressure switches, digital meters, current sensors, proximity switches and other products. After years of unremitting efforts, it has become one of the leading suppliers in the domestic automation industry. Our pressure transmitters can achieve an accuracy of more than 3/10, 000. The products have been widely used in oil, natural gas, electricity, chemical industry, metallurgy, building materials, food, light industry, environmental protection, aerospace, tap water, municipal and other industries.

It is a sensor science and technology innovation company that masters the core technology of MEMS chips. The company has a research and development center in Minnesota, USA. The leader is Dr. Pan Hanjin, a famous scientist in the sensor industry. Dr. Pan Hanjin has been deeply involved in the sensor industry for more than 20 years and is an expert in the sensor industry.

The company has a number of ASIC chips independently developed, which are widely used in industrial, automotive, home appliance and other markets.

BNSENS (Nanjing) Sensing Technology Co., Ltd. is a strategic partner of Honeywell in China. The two parties proposed a plan of East serving East and jointly developed several sensors specifically for the Chinese market. These sensors will be widely used in intelligent manufacturing, Internet of Things, artificial intelligence, and smart home fields. These sensors include: Magnetic sensors, temperature sensors, humidity sensors, force sensors, fire water pressure sensors, equipment vibration sensors, human body status monitoring sensors, motion sensors, etc.

History of BNSENS Company:

BNSENS is a company focusing on sensors, instruments, and electronic components. We are a young company, founded in 1999, just 25 years old, and we are still growing.

1999: The company's first pressure sensor was launched, mainly for the petroleum and petrochemical industries.

2002: The company expanded its product line and launched temperature sensors

2005: Started producing high-precision pressure sensors for the test and measurement market

2006: Became an official authorized agent of Honeywell

2009: Introduced the Six Sigma management system, and the product qualification rate was greatly improved

2010: Became a supplier of Emerson

2011: We started selling SICK sensors

2014: Introduced the sensor production line from Germany, developed more industrial control sensors, and cooperated with TSMC

2015: Cooperated with Siemens in Vietnam

2017: The factory moved to Nanjing High-tech Zone

2019: Became a national high-tech enterprise in China

2023: We started selling products from Infineon and Rohm

BNSENS, The Future Starts Here.